Nick Carver Photography Blog

Photography Tips, Tutorials, & Videos

CONTACT
 

Homemade Plamp

One of the most frustrating things in macro photography is trying to keep flowers still while photographing them. At the high magnifications of close-up photography, even the slightest trembling in the wind will ruin a shot. That's why someone smarter than me invented the Plamp (plant clamp) - an articulating arm with clips on either end that attaches to your tripod and can hold a flower steady for you.

It's a really great product, but I just couldn't justify the price, size and weight for something I'll use so rarely. So, instead, I made a trip to my hardware store, picked up a yard or so of their heaviest-gauge wire, bought a pack of charging clips and decided to throw an imitation plamp together myself.

Total cost of materials: About $3.00.
Total assembly time: About 10 minutes

Basically you just attach a clip to either end of the wire and you're done. You can wrap it around your tripod and position the arm to hold the flower just right. Of course, this isn't as good as the Plamp itself (it isn't as sturdy and is a little "springy"), but it definitely is cheap. Here's a shot I took with and without my homemade plamp (both pictures: 1/25 at f/14):

Without:

With:

See? Much better. Now go out and get your supplies!

My Custom Ring Light

I made myself a DIY ring light over the weekend that I wanted to share with everyone. Its design is inspired by the Ray Flash and its materials are inspired by this DIY ring light tutorial. Truthfully, I'd much rather own a Ray Flash, but $35 and a little elbow grease looked much more appealing than $300.


Sorry, I didn't take pictures of the building process, I don't have diagrams and this isn't a how-to post. Why? Partly because there are about a billion DIY ring light tutorials on the internet already that are probably easier than mine, but mostly because I am way too impatient to stop and take pictures throughout the building process. If enough people really love this design and need to know how to make it, I'll do another how-to post in the future. But unless I get bombarded with requests, I wouldn't count on it. It's that I'm selfish, it's just that I'm impatient.

But to give you a short description of it's design, I used galvanized rain gutter pipes (the kind that are really shiny) to reflect the light from my on-camera 550ex down into a clamp light reflector diffused with a store-bought cutting board mat. I think the picture of it on my camera is pretty self-explanatory, but let me know if you have any questions.

Here are the results of my first tests on my niece and sister-in-law. Took some time to figure out how to use this thing with good results...never worked with a ring light before. All pictures are shot with a 1/2 CTO on the flash.






Sorry for the poor image quality of the picture showing the ring light attached to my camera. My 5D is my only DSLR, so I had to use my little point and shoot Casio to get that shot.

Custom Filter Case


As (primarily) a landscape photographer, split neutral density filters are my bread and butter. I have 5 in all plus a solid ND and a polarizer. Split NDs are virtually useless in screw-in ring form, so I opt for the Singh-Ray rectangular filters with Cokin P series holders.

I've gone through several different filter cases from generic to name brand to custom to different custom, etc. There were some specific points I needed in a filter case that none of these fulfilled entirely. I wanted it to be small enough to fit in a camera bag and in a photo vest pocket, I wanted it to be able to attach to my belt or belt loop, I wanted it to be entirely enclosed when shut, I wanted no velcro closure (too loud) and I wanted it to adequately protect my filters without overkill.


Now I'm sure it's no secret among photographers that a CD wallet is a great option for this (if it is news to you - hooray!). The materials used to protect CDs are generally on par with materials used to protect photo equipment so there's no worry there. The sleeves are in a convenient binder-esque arrangement for easy browsing. It's small in width and length and relatively thin. The only problem I kept running into is I couldn't find a blasted CD case that would lay flat when opened. They all had this wrap-around design on the binding that would cause it to shut on itself like a new paperback novel.

Well this post is about a great case I found for this application as well as some of my modifications that make it the ultimate filter case.

First off, the brand of case is Case Logic and it's a 24 CD/DVD CD Wallet. It's great because it lays completely flat when opened - no spring return - and it's covered in this somewhat rubbery outer that has stood up excellently to the elements for me. It features a full zipper that is smooth and has a rubber-tipped zipper pull. It is the smallest CD wallet I have found that will still fit all my filters and its rounded corners and edges make for easy storage. I like it so much, I got two in case they discontinue it. I bought mine at Best Buy - not sure if they still sell them or not.

Now onto the mods to make it even better. I wanted to be able to attach it to my hip belt loop, so I needed to add a carabiner in the upper left corner. I did this by taking some strong string (I used a sunglasses cord I bought at REI), threading it behind the sleeves and wrapping them around the binding pegs (see picture). I then tied it at the top with a slight loop hanging over the edge at the end of the zipper. I recommend melting the ends of the cord with a lighter to avoid fraying. This made it so a small loop of the cord would hang out of the wallet in the upper left corner when the zipper was completely shut. I then attached a small carabiner to this loop and presto, you got yourself a wicked side filter wallet.






To make it even better, I put labels on each sleeve indicating the filter. I did one horizontally on the opposing sleeve for viewing horizontally and a smaller one vertically on the filter's sleeve. The vertical label makes more sense when using the wallet when it's hanging from your side. I then put little squares of thin cardboard on the opposite side of each filter sleeve. This keeps the sleeve rigid when the filter is removed making it much easier to slide it back in later.


I found this setup to work great for me. I just attach it to my right hip belt loop when I get my camera out and start shooting. I have every filter right at my fingertips in a completely sealed wallet (not water PROOF of course, but water resistant nonetheless). I can remove a filter and let the wallet drop to my side with no worries. It has stood up perfectly to many harsh conditions (especially sand and sea spray). I've never had a filter break in this wallet, it's easy to store and transport and it's cheap!